Compaq XL101-XL113, XL115, XL118-XL127 - page 97

PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1200XL SERIES REMOVAL SEQUENCE 17
Presario 1200 Series
Models: XL101-XL113, XL115, XL118-XL127
Removing the Heatspreader
To remove the Heatspreader, complete the following steps:
1. Prepare the computer for disassembly (pg 10).
2. Remove the Palmrest C over with TouchPad (pg 13).
3. Gently lift and turn the keyboard over
, allowing it to rest where the palmrest cover
normally sits.
4. Remove three screws from the Heatspreader and lift it out of the chassis.
To replace the Heatspreader, reverse these procedures.
Note: If the thermal pads on the Heatspreader are missing or damaged, a new
Heatspreader should be installed.
Important: Before installing the new Heatspreader, remove the plastic covering
from the thermal pads.
ÅWARNING: To prevent damage, do not use excessive force when replacing the
screws.