Compatible Systems 2270R manual IP Protocol, Basic Configuration Guide, Required for IP

24 Chapter 6 - Basic Configuration Guide

•Set to allow dial-in and/or dial-out

CV: Use the Link Configuration: WAN 1.

TB: Use configure and set the Mode, ConnectMode, DialIn and/or DialOut keywords in the Link Config WAN 1 section.

Suggested for Dial-On-Demand Operation

This mode of operation is only supported on the WAN 1 RS-232 inter- face. Outgoing dial-on-demand requires some additional information.

•Create dial-out script

•Set dialing method

•Set dial-out script to be used

•Set inactivity time

CV: Use the Link Configuration: WAN 1 Dialog Box to set the dialing method and to select a chat script (once you have created one). Use the WAN Chat Scripts Dialog Box (under Global/WAN Chat Scripts) to create your chat script.

TB: Use configure and then set the Dialing, DialOutScript, and DropInact keywords in the Link Config WAN 1 section. Use edit config and create a Chat section to contain your dialing script.

IP Protocol

Required for IP

WAN interfaces which are set for PPP operation do not generally use an IP address. They are set to act as an “unnumbered interface.” In this mode of operation, there are no required settings.

Suggested for IP

These parameters help supply information about the segment that the interface is connected to. With this information, routing can take place.

•Set IP RIP 1 or IP RIP 2

•Set IP static routes

CV: Use the TCP/IP Routing: WAN Dialog Box to set RIP, and the IP Static Routing Dialog Box (under Global/IP Static Routes) to set static routes.

TB: Use configure and set the RIPVersion keyword for in the IP WAN 0 (and/or WAN 1) section. Use edit config and add static routes in the IP Static section.