Introduction to the Octal T1-10/100 RIOP

1

Introduction to the Octal T1-10/100 RIOP

The Octal T1-10/100 Routing Input/Output Processor (RIOP), as part of the VSR multigigabit switching router, allows you to connect a local Ethernet and up to eight remote corporate networks. Each of the T1 interfaces has a data capacity of 1.544 Mbps, while the Ethernet interface can operate at either 10 Mbps or 100 Mbps.

This section of the manual contains information specific to the Octal T1-10/100 RIOP. It is divided into the following sections:

Chapter 1: Network Installation

Here you will find step-by-step instructions on how to physically install the Octal T1-10/100 and connect it to your network.

Chapter 2: Quickstart Configuration

The Quickstart section provides a basic list of parameters that must be entered into the Octal T1-10/100 for proper operation.

Chapter 3: Shipping Defaults

This section of the manual lists factory defaults for the interfaces.

Chapter 4: LED Patterns

This section of the manual describes the LED indicators for the Octal T1-10/100.

Page 5
Image 5
Compatible Systems manual Introduction to the Octal T1-10/100 Riop, Network Installation, Quickstart Configuration