Table of Contents |
|
Introduction to the Octal | 1 |
|
|
Chapter 1 - Network Installation | 2 |
|
|
Connecting the Octal | 2 |
Telco Line Connection Requirements | 3 |
Connecting a Line Device to the V.35 Interfaces | 3 |
Connecting a Management Console | 3 |
Powering Up the Router | 3 |
Chapter 2 - Quickstart Instructions | 4 |
|
|
ETHERNET INTERFACE CONFIGURATION | 4 |
IP Protocol | 4 |
Required for IP | 4 |
Suggested for IP | 5 |
IPX Protocol | 5 |
Required for IPX | 5 |
Suggested for IPX | 5 |
AppleTalk Protocol | 5 |
Required for AppleTalk | 5 |
Suggested for AppleTalk | 5 |
DECnet Protocol | 5 |
Required for DECnet | 5 |
Suggested for DECnet | 6 |
WAN INTERFACE CONFIGURATION | 6 |
Physical Communications Settings | 6 |
PPP Configuration | 6 |
WAN Link Configuration | 6 |
Required for Dedicated/Leased Line Operation | 6 |
Suggested for Dedicated Line Operation | 6 |
IP Protocol | 6 |
Required for IP | 6 |
Suggested for IP | 6 |
IPX Protocol | 7 |
Required for IPX | 7 |
AppleTalk Protocol | 7 |
Required for AppleTalk | 7 |
DECnet Protocol | 7 |
Required for DECnet | 7 |
Suggested for DECnet | 7 |
Frame Relay Configuration | 7 |
WAN Link Configuration | 8 |
Required for Dedicated Line Operation | 8 |
Suggested for Dedicated Line Operation | 8 |
Frame Relay DLCI Mappings | 8 |
IP Protocol | 8 |
Required for IP Numbered Interface | 8 |
i
