OPERATING INSTRUCTIONS
1.When placing the container on the unit base, make sure that the unit is turned OFF and is at a complete stop. Do not put the container on or take it off while the unit is running. Doing so may damage the drive shaft or blade assembly. For best results, do not fill container above
2.Be sure the switch is in the OFF position and plug the blender into a convenient outlet.
3.The Waring® Blendor is ideal for blending ice drinks. A hint when mixing ice drinks: keep the blades in the container covered with liquid, turn the unit on, remove the lid insert on top of the jar lid, and feed the ice cubes slowly into the jar. NOTE: Never use containers other than Waring® Blendor containers with your unit.
4.Put ingredients into container, then put on cover. Always add liquid ingredients first, unless otherwise specified in recipe. Always hold container with one hand while blending.
5.CAUTION: To avoid damage to your blender, do not run the blender if the blades become blocked or jammed during use. Turn the blender OFF immediately, remove the container from the blender base and dislodge the material that is blocking or jamming the blade.
6.NOTE: Your blender has a pulse feature located on the front of the base (black rubber circular piece). To use, press PULSE as needed.
7.For your safety and protection, this blender is equipped with a thermal protector. Should your blender overheat, the motor will automatically shut off. To restart, follow these steps:
•Unplug blender from electrical outlet.
•Let motor cool down for approximately 2 to 5 minutes depending on the contents in the blender.
•Once the motor has cooled down, plug unit into electrical outlet.
•Toggle to ON position and proceed.
4
