CANpro/104-Plus Opto User Manual
7 www.connecttech.com CTIM-00052 Revision 0.00 4/23/2009
800-426-8979 | 519-836-1291
Before You Begin
Before you begin, take a minute to ensure that your package includes the required components that should
have shipped with your CANpro/104-Plus Opto.
● One CANpro/104-Plus Opto CAN controller board
● One CD containing documentation
If anything is missing, contact Connect Tech or your reseller. Also, visit the Download Zone of the Support
Center on the Connect Tech website for the latest product manuals, installation guides, diagnostic utilities and
device driver software.
Installing the CANpro/104-Plus Opto Into Your System
Turn off the power to your embedded computer and open any enclosures needed to access the PC/104-
Plus or PCI-104 expansion connectors.
Carefully insert the board into the PC/104-Plus or PCI-104 connector.
Set the ID rotary switch accordingly (see Table 1).
Set the correct on-board jumpers for each CAN port (J1 – J6) (see pages 9-10 for more details).
Power on your embedded computer and install the appropriate drivers for your operating system.