Installation
Technical Data
Voltage: | |
Wattage: | |
Height: | 720 mm |
Width: | 593 mm |
Depth: | 585 mm |
(excluding handles and knobs) | |
Weight: | 52kg |
Electrical Connection
THIS OVEN MUST BE EARTHED
Electrical Requirements
This appliance must be installed by a qualified electrician/competent person. Safety may be impaired if installation is not carried out in accordance with these instructions.
Do not remove the screws from the earth tab extending from the oven mains terminal block (Fig. 1).
Before connecting the appliance make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This is situated on the lower front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).
Do not alter the electrical circuitry of this appliance.
This appliance complies with:
European Council Directive 73/23/EEC.
EMC Directive 89/336/EEC.
CE Marking Directive 93/68/EEC. Energy Label Directive 2002/40/EC.
Fig.1
Electrical Connection
The cable used to connect the oven to the electrical supply must comply to the specifications given below.
Connection | Min. size | Cable/flex | Fuse |
Via | Cable/flex | type |
|
|
|
|
|
• Cooker | 6mm2 | PVC/PVC | 35 A (min) |
Control |
| twin and |
|
Circuit |
| earth |
|
|
|
|
|
By connecting the appliance to a cooker point having a double pole isolating switch providing at least 3mm contact separation in all poles and protected with a fuse or miniature circuit breaker at your mains fuse box.
If you wish to connect an oven and a hob to a cooker point you can, by connecting the oven and hob separately to the cooker point. See Fig. 2.
NOTE: It is good practice to :
Fit an Earth Leakage Circuit Breaker to your house wiring.
Wire your appliance to the latest IEE regulations.
Fig. 2
5
