Installing the NT960/PCI in your System
To install the NT960/PCI Host Adapter in your computer follow these steps:
Computer components are very sensitive to static electricity. When installing adapters in your computer make sure that you wear an
1.Turn the power off to your computer.
2.Open your computer to expose the expansion slots (consult the system documentation for information on this procedure.)
3.Choose an available PCI expansion slot.
4.Remove the screw and the expansion slot cover from the slot you select and save both.
5.Place the NT960/PCI in the expansion slot and push down gently until the card seats fully in the slot.
Note: Do not force the card into the expansion slot. If you meet a great deal of resistance, remove the board and try again.
6.Align the mounting bracket and secure the board with the screw that you saved.
7.Close your computer.
ACM/16, ACM/16RJ and ACM/Flex16
The installation of an ACM/16, ACM/16RJ or ACM/Flex16 external module consists of:
1.Setting the ACM/16, ACM/16RJ or ACM/Flex16 address number
2.Installing the Serial Line Interface Modules (SLIMs) in the ACM/Flex16
3.Connecting one or more ACM/16, ACM/16RJ or ACM/Flex16 modules to the NT960/PCI Host Adapter
To insure a successful installation, you must configure the appropriate settings and follow the steps in the order specified.