Chapter 2: Hardware Installation |
Figure 10: LED interface indicators (ACM/Flex16)
ACM/Flex16
1 |
|
| 16 |
2 | SLIM | SLIM | 15 |
| Type | Type |
|
3 |
|
| 14 |
4 |
| Power | 13 |
|
| Activity |
|
| Address | Traffic |
|
5 |
|
| 12 |
6 | SLIM | SLIM | 11 |
| Type | Type |
|
|
|
|
710
89
Intellicon NT960 | ACM/Flex16 |
Connect Tech Inc. |
|
LEDs to indicate the electrical interface in use for specific groups of four ports.
where:
red =
amber = 20mA Current Loop
Note: The Serial Line Interface Modules control four ports, and therefore the LED indicators show the electrical interface in use for four ports.
ACM/16/16RJ/Flex16 to NT960/PCI Host Adapter
The NT960/PCI was designed to be compatible with existing ACM setups, as well as to improve the performance of these and other new installations. You can achieve this performance improvement by setting switch 6 on DIP switch block SW1 on the NT960/PCI Host Adapter and by using a new bus cable assembly. Please refer to Figure 1 for the location of DIP switch block SW1.