Titan/cPCI User’s Manual, Connect Tech Inc.

Installing the Titan/cPCI adapter in your systemTitan/cPCI and Rear I/O adapters

To install your Titan/cPCI or Rear I/O adapter in your computer follow these steps:

1.Turn off the power to your computer.

2.Remove the Titan from its packaging, and remove the protective rubber from the alignment pins on the Titan’s front panel.

3.Insert your Titan/cPCI into an available front 3U slot or insert your Titan/cPCI Rear I/O adapter into an available rear 3U slot. The black handle on the front panel should be on the bottom, in the lowered position.

4.Push the Titan into the cPCI slot until the handle mates with the card cage. Lift the handle to lock the Titan into place.

5.With a screwdriver, fasten the screw on the top of the panel into the card cage for added mechanical security.

Your Titan/cPCI and Rear I/O adapters are very sensitive to static electricity. Make sure you wear an anti-static wristband before you remove the card from the anti-static shipping bag. When you remove the board from the anti-static bag, handle it only by the edges and place it on the anti-static bag or an anti-static mat.

Revision 1.01

9