
Titan/cPCI User’s Manual, Connect Tech Inc.
Appendix B: Connectors/Pinouts
Connector Pinouts
Tables 1 and 2 outline the pinouts for the Titan/cPCI and Titan/cPCI Rear I/O connectors or cable connectors.
Technical Tip:
Please ensure that you terminate signals if your application does not use them. Failure to do so may result in a loss of a performance on your Titan/cPCI adapter.
Table 1:
Pin |
| |
No. | Signal | Direction |
1 | DCD | input |
2 | RxD | input |
3 | TxD | output |
4 | DTR | output |
5 | SG | signal ground |
6 | DSR | input |
| or +5V ** |
|
| or +12V ** |
|
7 | RTS | output |
8 | CTS | input |
9 | RI | input |
** This option is jumper selectable on the Titan/cPCI Rear I/O adapter only.
| |
Signal | Direction |
RxD (+) | input |
RxD | input |
TxD (+) | output |
TxD | output |
SR | signal reference |
CTS | input |
|
|
RTS (+) | output |
CTS (+) | input |
RTS | output |
|
|
Male
15
6 9
Cable Part Number: CAB04DX
Technical Tip:
Please ensure that you terminate the DCD or CTS signals if your application does not use them. The common way to do this is to connect DCD to DTR and/or to connect CTS to RTS. Failure to do so may result in a loss of performance.
14 | Revision 1.01 |