Introduction | Contec RT-U49E instruction

CheckMate™ IV

Model RT-U49E

Universal Remote

Control

Programming & Operating

Instructions

To have a clearer idea of the features and

capabilities of your remote control, take a moment

to carefully read these instructions

Save for future reference.

1. Introduction

Your Checkmate IV, Model RT-U49E, universal remote control is simple to program, easy to use, and can operate up to four

(4) electronic devices, which include:

CABLE	Cable television converters
TV	Televisions
VIDEO	VCR, DVD players
AUDIO	Audio-video (A/V) receivers
	Laser Disk (LD) players
	DMX & DCR Digital Music Converters

Your remote control is pre-programmed to operate the Scientific-Atlantra Explorer® and Pioneer Voyager® digital converters. However, it must be programmed (set-up) to operate your TV, VCR and AUDIO devices.

Programming your remote is a simple procedure using Point and Press™ Programming, an automatic method whereby the remote self-programs to each of your devices, eliminating the need to use codes. Programming your remote can also be done by entering code numbers.

2. Before Getting Started

Some of the special features on your remote control are:

Cable Pre-Programmed

Your remote control is pre-programmed to operate the Scientific-Atlantra Explorer® and Pioneer Voyager® digital converters. If you are operating either of these converters, no cable programming is necessary.

Point and Press™ Programming

Lets you program your TV, VCR and Audio devices without using codes. For more information, see sections 5, 6 and 7.

SmartKeys™

Program multiple button presses on the [CABLE], [TV], and [BYPASS] buttons. For more information, see section 13.

[DEVICE]

This button lets you select the operating mode of the remote control.

illuminate. While the current mode button is illuminated, press one of the other non-illuminated mode buttons to operate a different device.

Memory Guard™

Eliminates reprogramming after battery changes provided new batteries are installed within 4 hours of removal of old batteries.

3. Installing / Replacing Batteries

Install two (2) “AAA” batteries as indicated by the diagram in the battery compartment.

When the batteries become too weak to operate the remote control properly, the mode keys will become dim or not illuminate at all during use. When this happens, install 2 new “AAA’” size batteries.

Your remote control has Memory Guard , which eliminates reprogramming after battery changes provided new batteries are installed within 4 hours of removal of old batteries.

4. Programming Your Cable Converter

If you need to operate another converter, look up the brand and model number in the Cable Setup Code list. If you are not sure of your brand and model, contact your cable company.

To program (setup) your cable converter...

1.Turn on your cable converter.

2.Press [DEVICE], then [MUTE] together - hold both buttons down until the lighted mode buttons start blinking in sequence.

3.Press [CABLE]. The [CABLE] button will illuminate.

4.From the Cable Setup Code list, locate and enter the 3- digit code for your brand and model.

5.Press [CABLE] to lock in the code. The [CABLE] button will blink 2 times and go out.

Press [DEVICE] and the current mode button will

RT-U49E specifications

The Contec RT-U49E is a cutting-edge data acquisition device designed for a wide range of applications, including monitoring, control, and automation. Renowned for its versatility and reliability, this instrument is ideal for industrial environments, ensuring enhanced safety and efficiency.

One of the standout features of the RT-U49E is its multi-channel capability. It supports various input types, including temperature, voltage, and current measurements, making it suitable for diverse applications. With up to 49 input channels, this device allows for extensive data collection, enabling users to monitor multiple parameters simultaneously.

The RT-U49E employs advanced signal processing technologies, ensuring accurate and high-resolution measurements. It features a high sampling rate, which allows users to capture rapid changes in data, essential for real-time monitoring. This makes the device particularly useful in environments where quick decision-making is critical.

Another significant characteristic of the RT-U49E is its robust communication features. It supports multiple communication protocols, including USB and Ethernet, enabling seamless integration with various systems and software. This flexibility allows users to easily connect and transfer data to PCs or other devices for further analysis, enhancing the overall efficiency of operations.

The device's user-friendly interface is designed to simplify the monitoring and control processes. It features an intuitive control panel that allows users to configure settings quickly and easily without extensive training. This ease of use is a significant advantage in industrial settings where personnel may not have specialized technical skills.

In terms of durability, the Contec RT-U49E is built to withstand harsh environments. It is equipped with robust housing and is often designed to be resistant to dust and moisture, making it suitable for use in challenging industrial surroundings.

Overall, the Contec RT-U49E embodies a combination of flexibility, accuracy, and durability, making it an ideal choice for those seeking a comprehensive data acquisition solution. Its advanced features and technologies ensure that it can meet the demands of various applications, from research laboratories to industrial automation systems. As technological needs continue to evolve, the RT-U49E remains a reliable tool for data-driven decision-making and monitoring.

Contec RT-U49E operating instructions Introduction, Before Getting Started

Models: RT-U49E