Continental Electric CE21111 Installation, Grounding Instructions, Electrical Requirements

Models: CE21111

1 24
Download 24 pages 3.33 Kb
Page 4
Image 4

19.Do not operate any heating or cooking appliance beneath this appliance.

20.Be certain the glass tray and roller rings are in place when you operate the oven

21.This appliance should be serviced only by qualified service personnel contact nearest authorized service facility for examination, repair, or adjustment.

INSTALLATION

1.Make sure that all the packing materials are removed from the inside of the door.

2.WARNING: Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surface, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact qualified service personnel.

3.This microwave oven must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked in the oven.

4.Do not place the oven where heat, moisture, or high humidity are generated, or near combustible materials.

5.For correct operation, the oven must have sufficient airflow. Allow 20cm of space above the oven, 10cm at back and 5cm at both sides. Do not cover or block any openings on the appliance. Do not remove feet.

6.Do not operate the oven without glass tray, roller support, and shaft in their proper positions.

7.Make sure that the power supply cord is undamaged and does not run under the oven or over any hot or sharp surface.

8.The socket must be readily accessible so that it can be easily unplugged in an emergency.

9.Do not use the oven outdoors.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape wire for the electric current. The appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock.

Electrical Requirements

The electrical requirements are a 120 volt 60 Hz, AC only, 15 amp. It is recommended that a separate circuit serving only the oven be provided. The oven is equipped with a 3-prong grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded.

Extension Cord

If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3 blade grounding plug and a 3-slot receptacle that will accept the plug on the microwave oven. The marked rating of the extension cord shall be equal to or greater than the electrical rating of the appliance.

Notes:

1.If you have any questions about the grounding or electrical instructions, consult a qualified electrician or service person.

2.Neither the manufacturer nor the dealer can accept any liability for damage to the oven or personal injury resulting from failure to observe the electrical connection procedures.

Page 4
Image 4
Continental Electric CE21111 Installation, Grounding Instructions, Electrical Requirements, Extension Cord