Contour Products S67-T 4/07 manual To Assemble iPod Dok select models

S67-T.qxd 4/5/2007 4:00 PM Page 7

2

3

4

5

6

To Assemble iPod® Dok (select models)

WARNING

DO NOT turn the iPod® Dok upside down, unless the Dok is in the closed and latched position. iPod® could fall out.

1Determine which iPod® model you own (iPod® mini, 60GB iPod®, 40GB iPod®, 30GB iPod® or the 20GB iPod®). See www.apple.com for assistance in deter- mining which model you have.

2If you own the iPod® mini, proceed to Step 3. For all other models, remove the iPod® mini adapter by flexing the snap tab and pulling up on the adapter.

3Release the snap that holds the iPod® Dok in the closed or portable position.

4Select the proper donut-shaped protec- tion pad for your iPod®. For the mini, 30GB or 20GB iPod®, select the thick donut-shaped protection pad with yellow backing paper. For the 60GB or 40GB iPod®, select the thin donut-shaped protection pad with white backing paper. Remove the backing paper from the foam, and place the adhesive side of the foam pad onto the back of the speaker housing.

5Insert your iPod® into the iPod® Dok or insert your iPod® mini into the iPod® adapter. Insert the speaker Jack into your iPod® device.

6For use on a flat surface such as a table top, rest the iPod® Dok on the surface in the open position. For portable use with your stroller, push the speaker housing and the iPod® cradle together until you hear a snap. DO NOT turn the iPod® Dok upside down, unless the Dok is in the closed or latched position.

7Power and volume of the iPod® Dok are controlled through your iPod® device. Turn on your iPod® and adjust the vol- ume of your iPod® to a desired level.

NOTE: Song volume and clarity will vary with the quality of the song data that you downloaded to your iPod®.

7