TYPE 1
WHEEL GUARD MOUNTING
Wheel Guard
Wheel Dia. Part No.
3"(75mm) 865786
4"(100mm) 865988
Wheel
Blotters
844280 Spindle End Nut 
Recessed Flanges (Outer)
Wheel Dia. Part No.
4"(100mm)865991
Flange dia. should be minimum of 1/3 wheel dia.
WARNING
Wheel Guard Retainer Bolt
Torque to 30 to 40 in. lbs.
Lock Washer
Recessed Flanges (Driving)
Wheel Dia. Part No.
4"(100mm)865990
CAUTION | Cleco MODEL SERIAL NO. |
842970
865661 Driving Flange Key Driving Flange
Grip Ring
Wheel Guard
Retainer Bolt Nut
!CAUTION
DO NOT REMOVE THIS GUARD Ñ IT IS FOR YOUR PROTECTION
USE THIS GUARD ONLY WITH TYPE 1 WHEELS
DO NOT OVERTIGHTEN SPINDLE END NUT
FLANGES MUST BE AT LEAST 1/3 DIAMETER OF WHEEL
AVOID INHALING DUST RESULTING FROM THE GRINDING OPERATION
ALWAYS USE EYE AND HEARING PROTECTION
202595
!CAUTION
DO NOT USE WHEELS THAT HAVE BEEN DROPPED, DAMAGED, OR IMPROPERLY STORED Ñ THEY ARE DANGEROUS
USE ONLY WHEELS WITH SPEED RATING EQUAL TO OR GREATER THAN ACTUAL FREE RUNNING TOOL SPEED
CHECK TOOL SPEED WITH TACHOMETER BEFORE EVERY WHEEL CHANGE
READ THE MANUFACTURER'S OPERATING INSTRUCTIONS AND SAFETY INSTRUCTIONS BEFORE USING THIS
GRINDER | 202596 |
TYPE 1
PROPER GRINDING WHEEL MOUNTING
Type 1 Wheel Capacity | Proper | ||
Model | Wheel | Wheel | |
| Dia. | Thickness | Wheel Guard |
1/16" - 1/2" | |||
2" - 4" | 1/16" - 1/2" | Retainer Bolt | |
2" - 4" | 1/16" - 1/2" |
| |
2" - 4" | 1/16" - 1/2" |
| |
|
|
|
|
Use Only Wheels With Speed
Rating Above Tool Speed
Recessed Flanges
Flange Diameters
Identical
Recessed Flanges
Flange Diameters
WheelIdentical
Blotters
Spindle | CAUTION | Cleco MODEL SERIALNO. |
|
| |
End Nut | Avoid Side Loads | |
| ||
| Grinding |
|
| Face |
|
6
