Cooper Lighting ADY071468 installation instructions Small, OUTDOOR P2R, Visor and Non-Visor

Installation Instructions

Sheet 1 of 2

Vault C-Scroll Roundel

These installation instructions are valid with the above Ametrix styles.

Small, OUTDOOR

P2R

(Pendant, 2-way, Remote ballast)

Visor and Non-Visor

Warning: Before starting any work ensure that all sources of power are turned off. All work must meet local/national codes and be performed by a certified electrician. Do not mount fixtures vertically.

Exploded view and part call-out

1Securing Fixture to Ceiling

#10-32 x3/8" Set screws (2x)

	1/4-20 x2 3/4"
	Hex bolt
Canopy	(2x)

Use additional bracing around J-box to support fixture

1/4" fasteners (by others) (4X)

J-box

(by others)

#10-32 x3/8" Set Screw (2X)

Canopy

1/4-20 x 2 3/4" Hex bolt (2X)

#8-32 x3/8" Pan head screws (8x)

Attention:

Dual fixture assemblies require additional bracing/structure

around J-box to support fixture.

2Wiring the fixture

1/4-20 x2 3/4" Hex bolts (x2)

Cover plate

#8-32 x3/8"

Pan head screws (x8)

1.Slide fixture assembly onto pendant and secure with both 1/4- 20 x.2 3/4" hex bolts.

2.Remove cover plate on bottom of fixture assembly.

3.Attach appropriate wires and ensure all connections are properly matched.

4.Secure cover plate with eight #8-32 x3/8" pan head screws.

1.Remove both 1/4-20 x 2 3/4" hex bolts from bottom of pendant.

2.Remove both #10-32 x 3/8" set screws and allow canopy to slide down pendant.

3.Run wires from J-box into pendant, ensure there is enough wire to reach cover plate on bottom of fixture assembly.

4.Using appropriate fasteners, secure fixture to ceiling. Use additional bracing around J-box to support fixture.

5.Replace canopy and secure using both set screws.

3Sealing the fixture

#6-32 x1/2" Socket cap screw (2x)

#6-32 x5/8" Socket cap screw

1.To seal fixture, ensure door is secured with provided socket cap screws. Secure #6-32 x1/2" socket cap screws above door latches.

2.Secure #6-32 x5/8" socket cap screw into center of door.

3.Refer to supplementary sheets for torque specs and aiming instructions.

ADY071468 REV B(ECN80481)