SECTION 15: REMOVAL AND REPLACEMENT PARTS
15.4 Flue Fan Vertical Installation
Air Intake
Adapter
Intake &
Exhaust Covers
Mounting Plate
to Vent Box
fixing screws
Gaskets
Vent Box
Mounting Plate
to Flue Fan
fixing screws
To remove the fan, remove 3 screws securing the fan and mounting plate to the vent box.
To remove the fan from the mounting plate, remove the 4 screws.
Refit in reverse order.
To change the flue and air intake orientation from back to top, remove the fan and mounting plate as above.
Remove intake and exhaust covers from top of the heater.
Intake &
Exhaust
Covers
Air Intake Adapter
Rotate the fan, mounting plate and gasket clockwise until the flue adapter lines up with the top hole. Secure with 3 screws.
Gasket
Flexible Duct |
Mounting Plate
to Vent Box
fixing screws
Remove the flexible duct from the air intake adapter on the back.
Remove the air intake adapter from the back of the heater and install in the appropriate hole on top. Reconnect the flexible duct.
Install intake and exhaust covers over the back holes.
Ensure sealed joints.
Ensure mounting plate orifice is clear and not obstructed.
MODEL |
| ||||||
|
|
|
|
|
|
|
|
|
| Fasco | Fasco | Fasco | Torin | Sit Controls | Sit Controls |
Flue Fan |
| S6818 | P1210838 | P1210838 | |||
|
|
|
|
|
|
|
|
RG P/N |
| 90710470 | 90710470 | 90710470 | 90710460 | 90710460 | 90710460 |
|
|
|
|
|
|
|
|
Air Plate | mm Ø | 35 | 44 | 57 | 64 | 109.2 | 109.2 |
| in Ø | 1.38 | 1.75 | 2.25 | 2.50 | 4.3 | 4.3 |
|
|
|
|
|
|
|
|
RG P/N |
| 11111210 | 11112210 | 11113210 | 11114210 | 11115210 | 11115210 |
|
|
|
|
|
|
|
|
IT IS IMPORTANT THAT ONLY THE CORRECT FLUE FAN SPECIFIED FOR EACH MODEL TYPE IS USED WHEN REPLACING THESE ITEMS.
Carry out a commission after working on or changing a flue fan. See Page 18, Section 11.
29