Installing the Processor
NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer.
NOTICE: When replacing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.
1Follow the procedures in "Before You Begin" on page 151.
2Remove the computer cover (see "Removing the Computer Cover" on page 153).
3Rotate the
4Rotate the processor access door to its open position.
5If you are replacing a processor, remove the processor (see "Removing the Processor" on page 179).
6Unpack the new processor, being careful not to touch the underside of the processor.
NOTICE: You must position the processor correctly in the socket to avoid permanent damage to the processor and the computer when you turn on the computer.
7Open the processor cover by sliding the release lever from under the center cover latch on the socket. Ensure that the release lever is fully extended.
Adding and Replacing Parts
