![](/images/new-backgrounds/1122322/122322479x1.webp)
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer.
NOTE: If you are adding a floppy drive to your tower computer, see "Installing a Floppy Drive (Tower Computer)" on page 243.
NOTE: If you are adding a floppy drive to your desktop computer, see "Installing a Floppy Drive (Desktop Computer)" on page 250.
Removing a Floppy Drive (Tower Computer)
1Follow the procedures in "Before You Begin" on page 151.
2Remove the computer cover (see "Removing the Computer Cover" on page 153).
3Remove the drive panel (see "Removing the Drive Panel" on page 233).
4Disconnect the power and data cables from the back of the floppy drive.
5Disconnect the other end of the drive cable from the system board connector labeled "DSKT." To locate system board connectors, see "System Board Components" on page 28.
240
Adding and Replacing Parts