
INSERT BOOTABLE MEDIA — Insert a bootable floppy disk, CD, or other bootable media.
INVALID CONFIGURATION INFORMATION - PLEASE RUN SETUP PROGRAM — Enter the system setup program (see "System Setup" on page 89) and correct the computer configuration information.
KEYBOARD FAILURE —See "Keyboard Problems" on page 112.
MEMORY ADDRESS LINE FAILURE AT address, READ value EXPECTING value — See "Memory Problems" on page 114.
MEMORY ALLOCATION ERROR —
1 Turn off the computer, wait 30 seconds, and then restart the computer.
2 Try to run the program again.
3 If the error message appears again, see the software documentation for additional troubleshooting suggestions.
MEMORY DATA LINE FAILURE AT address, READ value EXPECTING value —
MEMORY DOUBLE WORD LOGIC FAILURE AT address, READ value EXPECTING value — MEMORY ODD/EVEN LOGIC FAILURE AT address, READ value EXPECTING value — MEMORY WRITE/READ FAILURE AT address, READ value EXPECTING value —
MEMORY SIZE IN CMOS INVALID —
See "Memory Problems" on page 114.
NO BOOT DEVICE AVAILABLE —
•If the floppy drive is your boot device, ensure that a bootable floppy disk is in the drive.
•If the hard drive is your boot device, ensure that the cables are connected and that the drive is installed properly and partitioned as a boot device.
•Enter system setup and ensure that the boot sequence information is correct (see "System Setup" on page 89).
Troubleshooting Tools