
aAlign the computer cover with the tabs on the computer base.
bPivot the cover down and gently press the cover until it clicks into place.
cEnsure that the cover is locked. If not, repeat all of step 3.
1
2
1 computer cover | 2 computer base |
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
4Connect your computer and devices to electrical outlets, and turn them on.
5After you open and close the cover, the chassis intrusion detector, if enabled, causes the following message to appear on the screen at the next computer
ALERT! Cover was previously removed.
6Reset the chassis intrusion detector by changing Intrusion Alert to Enabled or
162
Adding and Replacing Parts