
1 | 2 |
3
|
|
| 4 |
| 5 |
|
|
1 | card fan | 2 | card fan cable |
3 | card fan | 4 | front fan |
| (FAN_CCAG) |
|
|
5 |
|
|
9Disconnect the front fan from the connector labeled FAN_FRONT on the system board (see "System Board Components" on page 28.)
10If the system is in tower mode, pull to remove the
11Disconnect the Power1 and Power2 connectors from the system board (see "System Board Components" on page 28).
12Remove the cables from the cable guide on the front fan.
13Press the tab between the card fan and the front fan towards the card fan as you lift it up and out of the computer.
14Unscrew the fan case and lift to remove it from the computer.
Adding and Replacing Parts