1 
2
3
1 | interface cable | 2 | Media Card Reader connector |
|
|
| (USB on system board) |
3 | Media Card Reader |
|
|
12Replace the desktop drive retention insert and fold the handle down.
13Check all cable connections, and fold cables out of the way to allow for airflow between the fan and cooling vents.
14Reinstall the drive panel (see "Replacing the Drive Panel" on page 237).
15Ensure that all connectors are properly cabled and firmly seated.
16Replace the computer cover (see "Replacing the Computer Cover" on page 161).
NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
Adding and Replacing Parts
