1 | 2 | SATA data cable | |
3 | power cable | 4 | power supply |
5 | SATA connector on system board | 6 | optional SATA hard drive in FlexBay |
7Disconnect the data cable from the back of the hard drive and from the connector on the system board.
If it is connected to a card and you will not be reinstalling the drive, route the data cable to the side.
8Slide the
1
2
1 | 2 | optional third hard drive in FlexBay |
9Set the drive aside in a secure location.
NOTICE: If metal shields are present in your computer configuration, they must be installed at all times while your computer is in use or your computer may not function properly.
220
Adding and Replacing Parts
