Installing a Media Card Reader (Desktop Computer)
1 Follow the procedures in "Before You Begin" on page 151.
2 Remove the computer cover (see "Removing the Computer Cover" on page 153).
3 Remove the drive panel (see "Removing the Drive Panel" on page 233).
4 Pull the desktop drive retention insert out by the handle and set it aside in a safe place.
1
2
1 | drive retention insert | 2 | Media Card Reader |
5If another device is installed in the FlexBay, remove that device (see the appropriate removal instructions in this section).
NOTICE: If metal shields are present in your computer configuration, they must be installed at all times while your computer is in use or your computer may not function properly.
264
Adding and Replacing Parts