Dell NX046 manual 276

1

2

1 drive retention insert 2 optical drive

7Remove the optical drive from the drive bay.

NOTICE: If metal shields are present in your computer configuration, they must be installed at all times while your computer is in use or your computer may not function properly.

8If you are not installing another drive in the optical drive bay and metal shields are present in your computer (see "About the Metal Shields Present in Some Drive Configurations" on page 207):

a Install the 5.25-inch metal shield in its place; align its screws in the metal rails and push the shield back until it clicks into place.

NOTE: A metal shield for the optical drive bay can be ordered from Dell. See "Contacting Dell" on page 295.

b Install a drive-panel insert over its drive bay (see "Replacing a Drive- Panel Insert" on page 236).

276

Adding and Replacing Parts