12Reinstall the drive panel (see "Replacing the Drive Panel" on page 237).
13Ensure that all connectors are properly cabled and firmly seated.
14Replace the computer cover (see "Replacing the Computer Cover" on page 161).
NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
15Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
16Enter the system setup program (see "System Setup" on page 89) and select the appropriate Diskette Drive option.
17Verify that your computer works correctly by running the Dell Diagnostics. See "Dell Diagnostics" on page 136.
Removing a Floppy Drive (Desktop Computer)
1Follow the procedures in "Before You Begin" on page 151.
2Remove the computer cover (see "Removing the Computer Cover" on page 153).
3Remove the drive panel (see "Removing the Drive Panel" on page 233).
4Disconnect the power and data cables from the back of the floppy drive.
5Disconnect the other end of the drive cable from the system board connector labeled "DSKT." To locate system board connectors, see "System Board Components" on page 28.
246
Adding and Replacing Parts
