1
2
1 | FlexBay | 2 vented metal insert |
8Remove any drives installed in the optical drive bays (see "Optical Drive" on page 268).
9If there is a drive installed in the Flexbay, remove it (see "Cards" on page 193).
10Rotate the Dell badge by turning the plastic handle on the back of the front panel until the badge is in the correct orientation.
11Reinstall any optical drives in the new orientation (see "Optical Drive" on page 268).
12If you had a floppy drive or Media Card Reader installed in the FlexBay, reinstall it in the new orientation (see "Media Card Reader" on page 254).
34
About Your Computer
