1
2 |
1 | 2 | floppy drive |
NOTICE: If metal shields are present in your computer configuration, they must be installed at all times while your computer is in use or your computer may not function properly.
7If you are not installing another drive in the FlexBay and metal shields are present in your computer (see "About the Metal Shields Present in Some Drive Configurations" on page 207), install the vented metal insert over the FlexBay and the empty space beneath it:
a Insert the metal insert’s two upper screws and its two lower screws into the corresponding slots inside the FlexBay.
b Push the vented metal insert until it clicks into place and its metal tabs rest flush against the chassis surface.
Install a
8If you are installing another drive in the FlexBay, see the appropriate installation procedure in this section.
242
Adding and Replacing Parts
