6If the FlexBay is not populated and metal shields are present in your computer (see "About the Metal Shields Present in Some Drive Configurations" on page 207), remove the vented metal insert from the FlexBay:
a Pull the vented metal insert forward until its surface is flush with that of the surrounding chassis.
b Rotate the bottom of the metal insert up towards you, disengaging its lower screws from the surrounding metal.
c Lift the metal insert from the computer, disengaging its top screws and metal tabs from the surrounding metal.
1
2
1 | FlexBay | 2 vented metal insert |
7Remove the FlexBay
Adding and Replacing Parts
