NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
15Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
16Enter the system setup program (see "System Setup" on page 89) and select the appropriate USB for Flexbay option.
17Verify that your computer works correctly by running the Dell Diagnostics. See "Dell Diagnostics" on page 136 for instructions.
Removing a Media Card Reader (Desktop Computer)
1Follow the procedures in "Before You Begin" on page 151.
2Remove the computer cover (see "Removing the Computer Cover" on page 153).
3Remove the drive panel (see "Removing the Drive Panel" on page 233).
4Disconnect the interface cable from the back of the Media Card Reader.
5Disconnect the other end of the interface cable from the system board connector labeled "USB." To locate the system board connector, see "System Board Components" on page 28.
260
Adding and Replacing Parts