Cooper Lighting MR11 specifications Next Generation, Recessed Multi-Lamp Fixture

DESCRIPTION

An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes TWO (2) 12V MR11 lamps.

For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

Type

Date

A.... Housing

Housing, junction box & trimless meshplate assembly are all steel construction. Perforated meshplate allows for trimless installation in drywall/plaster

branch wiring, 6 #12 90º C supply	lamp adjustment. Beveled-edge lamp ring
conductors or 60º C for end of run. The	is secured with threadless, bayonet action.
fixture is also UL listed as ‘access above	Optional retractable arm is available for
ceiling not required’.	lamp pulldown and extreme aiming.

COMBOLIGHT®

Next Generation

ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes

a beveled “knife-edge” lips to ensure a clean edge. Can accommodate 0.50” to 1.25” ceiling thickness. Optional Chicago Plenum configuration available.

B.... System Protection:

Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.

C... Junction Box

Junction Box is UL listed for through

D... Electrical

Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic or magnetic low voltage transformers on individually removable “trays” for easy maintenance. May also be configured for remote power.

E.... Lamps

Two (2) 12V MR11 lamps mounted in adjustable double gimbals. Lamp holders are individually removable and may be re- gressed 1” for additional cut-off. Lamp can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x 45º locking

F.... Mounting

Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure. Perforated flaps along housing sides for securing trimless insert to fixture and drywall.

G... Labels

cULus listed for non-type IC applications, suitable for use in damp locations.

Ceiling Cut-Out: 4.67” x 8.55”

Recessed Multi-Lamp Fixture

Two (2) Light 12V MR11

New Construction

Housing

Trimless

13.19”

5.75”

10.24”

Double

Gimbal

45º x 45º

Adjust 3.88”

NOTES:

De-Rated wattage labels are available. 12V Primary voltage is available.

18.20”

14.07”

14.11”

7.75”

3.88”

	Perforated
	Meshplate
Integral Low Voltage	Thermal
Transformers	Protector

ORDERING INFORMATION

C2

N

N

Configuration	Lamp Type / Wattage Label
C2 = COMBOLIGHT	020M11 =	20 Watt max. MR11 12V
Recessed Two (2) Light	035M11 =	35 Watt max. MR11 12V

Housing

N = New Construction

C = Chicago Plenum

Power Supply

Voltage

1 = 120V

2 = 277V

Power Supply

E = Electronic Low Voltage

Transformer

M = Magnetic Low Voltage

Transformer

Lamp Mechanism

G = Double Gimbal

R = Retractable Double Gimbal

Trim Insert

N = Trimless

Trim Insert Finish

N = Trimless

Housing Interior/Electrical Door/Sleeve Finish

W = White

B = Black

S = Industrial Silver

Specifications and Dimensions subject to change without notice.

rev 121107

www.cooperlighting.com RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031