Roland VS-880EX owner manual Using the Internal Effects, Inserting with Input and Track Channels

Chapter 4 Using the Internal Effects

Inserting with Input and Track Channels

1.Press [CH EDIT (SELECT)] for the channel to which you want to apply the effect.

The CH EDIT indicator lights.

2.Press PARAMETER [ ] [ ] until “FX1 Ins=” appears in the display.

Now you can make settings for effect 1.

3.Select how the effect will be connected. Rotate the TIME/VALUE dial.

CONDITION MARKER# TIME

dB

0

4

12

24

48

*When Insert or Insert S is selected, that effect cannot be used on any other channel. Furthermore, when Insert L or Insert R is selected, that effect can be inserted on only one other channel.

4.Press PARAMETER [ ].

“FX1 Ins Send=” appears in the display.

5.Rotate the TIME/VALUE dial.

Ins Send (Insert Send Level)

This adjusts the level of the signal (0–127) sent to the Insert effect. Set the initial value to “100.”

6.Press PARAMETER [ ]. “FX1 Ins Rtn=” appears in the display.

7.Rotate the TIME/VALUE dial.

Ins Rtn (Insert Return Level)

Chapter 4

INPUT TRACK	AUX MASTER	This adjusts the level of the signal (0–127) returned
		from the Insert effect. Set the initial value to “100.”

FX1 Ins (Effect 1 Insert Switch)

This sets how the effects are connected.

Insert: Inserts in the between the equalizer and fader.

InsertL: Inserts in the left channel of the stereo effect.

InsertR: Inserts in the right channel of the stereo effect.

InsertS: Inserts in the combined left and right chan- nels of the stereo effect in series.

8.At this point, you are ready to insert FX1 into the selected channel. Press [PLAY (DISPLAY)].

Return to Play condition.

9.You can insert FX2 in the same way. In this case, perform step 2 so that “FX2 Ins=” is displayed.

*Steps 4–7 can be adjusted only when the effect is being used as an insertion effect.

Inserting an Effect into the Master Block

Insert

EQ

(2band, 3band)

Insert L

EQ

(2band, 3band)

Insert R

EQ

(2band, 3band)

L

R

L

R

FX

FX

FX

L

R

L

R

This inserts the effect into the MASTER Out. After the mix for each channel is completed, the entire song is put through the compressor, which is convenient at such times as when you listen to the total volume while mixing down.

1.Hold down [SHIFT] and press [EDIT (FADER)].

2.Press PARAMETER [ ] [ ] until “MST FX1 INS Sw=” appears in the display.

If FX1 has been inserted into another channel, the dis- play will indicate “MST FX1 INS Sw=—” (the setting cannot be made).

3. Rotate the TIME/VALUE dial.

Insert S

EQ	L		L
(2band, 3band)		FX

RR

67