Chapter 2 Basic Operation
Deleting a Stored Time Location
1.While holding down [CLEAR], press the LOC button
Using Markers
Along with the playback locate points, you can set up to 1000 Markers in sequence. The Markers are also a useful and convenient way to define sections of a song to be repeated in Loop Recording or for marking points in
*An interval of at least 0.1 seconds must left between markers. It will not be possible to add a new markers if a markers already exists at a location less than 0.1 seconds away.
Marking a Time Location
Press [TAP], and a marker will be added to the current location. This can be done during recording or play- back of the song as well as when the song is stopped.
TAPTAPTAPTAPTAP TAPTAP
| 0 | 1 | 2 | 3 | 4 | 5 | 6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
00h00m00s00 | Time |
About Marker Numbers
Each marker is assigned a number
TAP
| 0 | 1 | 2 | 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Time
| Before setting a Marker |
| ||
0 | 1 | 2 | 3 | 4 |
Time
After setting a Marker
Moving the Location of Markers
To move to the Marker immediately preceding the current playback time, press [PREVIOUS]. You move ahead one marker at a time in the order they are placed each time the button is pressed. To move to the Marker immediately following the current playback time, press [NEXT].
PREVIOUS |
| NEXT |
0 | 1 | 2 |
Time
Displaying Markers
The Marker number at any playback location is indicated in the display. If there is no Marker number in the current location, then the closest preceding Marker number is displayed. If there are no markers in the song,
38