
Chapter 13 Making Global Settings and Checking Conditions
PeakHoldSw (Peak Hold Switch)
With this set to “On,” the level meter in the graphic display holds the display of peak levels.
5.Press [PLAY (DISPLAY)].
Return to Play condition. Now, the peak display is reset (cleared) each time [PLAY (DISPLAY)] is pressed.
Checking the Remaining Disk Space
The amount of free disk space available for recording the current song is displayed as “REMAINING TIME” field in the display. You can select the type of display for this.
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
Remaining amount (in the example, 294 minutes 40 seconds)
1.Press [SYSTEM] several times until “SYS System PRM ?” appears in the display.
2.Press [YES].
3.Press PARAMETER [ ] several times until “SYS RemainDsp=” appears in the display.
4.Rotate the TIME/VALUE dial.
RemainDsp (Remaining Display)
This selects how the remaining disk space is shown.
Time: This indicates the time (minutes/seconds) left for recording.
CapaMB: This shows the actual memory (in megabytes).
Capa %: This indicates the remaining space as a per- centage of the total disk space.
Event: This shows the number of events used in the recording.
5.Press [PLAY (DISPLAY)]. Return to Play condition.
When Using the Foot Switch
With an optional foot switch (such as the Roland
1.Press [SYSTEM] several times until “SYS System PRM ?” appears in the display.
2.Press [YES].
3.Press PARAMETER [ ] several times until “SYS Foot Sw=” appears in the display.
4.Rotate the TIME/VALUE dial.
Foot Sw (Foot Switch)
This sets the foot switch function.
Play/Stop: Pressing the switch alternately starts and stops playback of the song.
Record: Works the same as the [REC] button. Use this to switch between recording and playback during manual
TapMarker: Works the same as the [TAP] button. Mark points are set when the pedal is pressed.
Next: Works the same as the [NEXT] button. Each time the pedal is pressed recalls the next marker.
Previous: Works the same as the [PREVIOUS] but- ton. Each time the pedal is pressed recalls the previous marker.
GPI: This controls start and stopping of play- back of the song according to the GPI trigger signal received from the FOOT SWITCH jack.
GPI (Appendices p. 123)
5.Press [PLAY (DISPLAY)]. Return to Play condition.
165
Chapter 13