Chapter 5 Storing Mixer Settings
Recalling Recording Settings
(Recording/Template)
Select this when you want to record the performance input via the INPUT jacks. Recall a preset routing (recording) which has been
1.Press [EZ ROUTING] several times until “EZR Recording ?” appears in the display.
2.Press [YES].
“EZR Use Template” (do you wish to apply the tem- plate?) appears in the display.
3.Press [YES].
4.When the routing has been recalled, “Complete” appears in the display, and return to Play condi- tion. At this time, the mixer settings will be as fol- lows.
INPUT Jack | Recording Track |
INPUT 1 | 1 |
INPUT 2 | 2 |
INPUT 3 | 3 |
INPUT 4 | 4 |
INPUT 5 | 5 |
INPUT 6 | 6 |
DIGITAL IN1 (7) | 7 |
DIGITAL IN1 (8) | 8 |
Display (parameter name) Input | Track | ||
|
| Mixer | Mixer |
|
|
|
|
ATT |
| current value | current value |
Phase |
| current value | current value |
MIX Sw |
| Off | On |
MIX Level |
| 100 | 100 |
MIX Pan | 0 (IN7=InsertL, IN8=InsertR) 0 | ||
V.Track |
| - | currently |
|
|
| selected |
|
|
| |
EQ Switch |
| On | - |
EQL (Gain) |
| 0 dB | - |
EQL (Frequency) |
| 300 Hz | - |
EQM (Gain) |
| 0 dB | - |
EQM (Q) |
| 0.5 | - |
EQM (Frequency) | 1.4 kHz | - | |
EQH (Gain) |
| 0 dB | - |
EQH (Frequency) | 4 kHz | - | |
FX1 Ins |
| Off (IN3=InsertL, IN4=InsertR) Off | |
FX2 Ins |
| Off | Off |
AUX Sw |
| Off | Off |
Display (parameter name) | Input | Track |
| Mixer | Mixer |
|
|
|
Fader Link | Off | Off |
Channel Link | Off | Off |
EFFECT1 | Off | Off |
EFFECT2 | Off | Off |
Display (parameter name) | Master Block |
Master Sel | MIX |
EQ Mode | 3band |
Direct Out | Off |
Master FX1 Ins | - |
Master FX2 Ins | - |
Display (parameter name) | Effect |
FX1 Sel | A96:DualComp/Lim |
FX2 Sel | A96:DualComp/Lim |
Recalling Track Bouncing Settings
(Bouncing/Template)
Select this when recording the performance data from multiple tracks onto a number of other tracks. Recall a preset routing (bouncing) which has been
1.Press [EZ ROUTING] several times until “EZR Bouncing ?” appears in the display.
2.Press [YES].
“EZR Use Template” (do you wish to apply the tem- plate?) appears in the display.
3.Press [YES].
4.When the routing has been recalled, “Complete” appears in the display, and return to Play condi- tion. At this time, the mixer settings will be as fol- lows.
Recording Track: TRACK
Input jack/track/effect assigned to the recording track: INPUT
DIGITAL IN1 (7/8) TRACK
FX1 Return
FX2 Return
Chapter 5
75
