Chapter 3 Multi-Track Recording

4.Press PARAMETER [ ] [ ] several times until “EQ Switch=” appears in the display.

5.Rotate the TIME/VALUE dial.

EQ Switch (Equalizer Switch)

If you wish to use the equalizer, set this “On.” If not, set this “Off.” When equalizer settings are being made, the equalization curve will be shown graphically in the bar display. If this is “Off” the equalizer-related parameters will not be available. For this example, select “On” so that the equalizer will be applied.

6.Hold down [SHIFT] and press the channel 3 [EQ Low (CH EDIT)].

7.Use CURSOR [ ] [ ] and the TIME/VALUE dial to make the setting.

EQL (Equalizer Low)

This adjusts the gain (-12–12 dB) and the center fre- quency (40 Hz–1.5 kHz) of the low-range (shelving) equalizer.

Gain Frequency

CONDITION MARKER#

TIME

 

 

 

 

 

 

dB

0

4

12

24

48

INPUT TRACK

AUX MASTER

+

EQL gain (-12–12 dB)

Gain

0

If the Display Indicates “Not 3band EQ”

If “Not 3band EQ” is displayed, the EQ Mode (equalizer mode) is set to “2 band EQ.” In this case, it will not be possible to adjust the mid-range equalizer.

9.Rotate the TIME/VALUE dial.

EQM (Equalizer Mid)

This adjusts the gain (-12–12 dB) of the mid-range (peaking) equalizer.

Gain

CONDITION MARKER#

TIME

 

 

 

 

 

 

dB

0

4

12

24

48

INPUT TRACK

AUX MASTER

+

EQM gain (-12–12 dB)

Gain

0

Frequency

-

EQM frequency (200 Hz–8 kHz)

 

10. Press PARAMETER [

].

11. Use CURSOR [ ] [

] and the TIME/VALUE

-

Frequency

EQL frequency (40 Hz–1.5 kHz)

dial to make the setting.

8.Hold down [SHIFT] and press the channel 4 [EQ Mid (SELECT)].

58

Page 58
Image 58
Roland VS-880EX EQ Switch Equalizer Switch, EQL Equalizer Low, If the Display Indicates Not 3band EQ, EQM Equalizer Mid