Chapter 7 Use with a Zip Drive
17.When copying over multiple Zip disks, “Insert Disk #” (# indicates the number in the order of insertion) appears in the display. Insert each of the disks once more in the proper order and press [YES].
18.When the Archives Store procedure is finished, return to Play condition.
Loading Data From Disks (Extract)
1.Select the load (restore) destination drive (internal hard disk) as the current drive.
2.Insert a disk that was copied by Archives Store into the Zip drive.
3.Press [SONG] several times until “SNG Song Copy ?” appears in the display.
4.Press [YES].
“SNG CpyMode=” appears in the display.
5.Rotate the TIME/VALUE dial. Here, select “Archives.”
CpyMode
Select how the song will be copied.
Playable: Playable type.
Archives: Archives type.
6.Press PARAMETER [ 
].
“SNG ArcTarget=” appears in the display.
7.Rotate the TIME/VALUE dial. If you wish to copy the current song, select “1 Song.” To copy all songs from the current drive, select “All.”
8.Press PARAMETER [ 
].
“SNG Arc.Drive=” appears in the display.
9.Rotate the TIME/VALUE dial. select the disk drive from which the data will be loaded. For this operation, you will be able to select only remov- able disk drives which are connected to the SCSI connector. It is not possible to select the current drive (the internal hard disk) as the copy destina- tion drive. For example if you wish to copy from a Zip disk, select “SC5:0.”
10.Press PARAMETER [ 
].
“SNG Arc.Func=” appears in the display.
11.Rotate the TIME/VALUE dial. Here, select “Extract.”
Arc.Func (Archives Function)
Select the Archive Type copy method.
Store: Saving to Zip Disks.
Extract: Loading from Zip Disks.
12.Press [YES].
A message asking if you want to continue appears in the display.
13.Press [YES].
In step 7, select “1 Song.” If two or more songs were saved to the Zip disk, the names of the saved songs will also be displayed. Use the TIME/VALUE dial to select the name of the song you wish to copy.
14.Press [YES].
“STORE Current?” (Store the current song?) appears in the display.
15.If you wish to save the current song, press [YES]; if not, then press [NO]. If you have selected a demo song, then press [NO].
16.If you have selected “All” in step 3, the display will ask “Init. IDE:0 OK?” This message is asking you to confirm that you wish to initialize the load- ing destination drive (the internal hard disk). If you wish to initialize the drive and then load, press [YES]. If you decide not to initialize, press [NO].
*If at this point you press [YES], all songs saved on the internal hard disk will be lost. Normally you should press [NO]. If the loading destination hard disk does not have sufficient space, you should first make a backup copy of the internal hard disk, and then press [YES].
17.Execute the load. When copying over multiple disks, “Insert Disk #” (# indicates the number in the order of insertion) appears in the display. Insert the next disk and press [YES].
18.When the Archive Extract procedure is finished, return to Play condition.
About power-save mode
If approximately thirty minutes pass without data being written to or read from a disk, a Zip drive will automatically stop rotation of the disk. This is referred to as Auto Power Save mode (Sleep mode). This function limits the power consumption and extends the life of the disk. When you perform a read or write operation on the disk, it will return to its normal state. This will take two or three seconds.
