Chapter 5 Storing Mixer Settings
29.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
30.“Use EFFECT2 ?” appears in the display. If you wish to use effect 2 press [YES], and make settings for effect 2 as described in steps
31.“TR* AUX Snd” appears in the display. Rotate the TIME/VALUE dial. If you wish to send the play- back track to the AUX bus, select either “Pre” or “Pst,” and proceed to step 32. If you do not wish to send the playback track to the AUX bus, select “Off,” and proceed to step 36.
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
32.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
33.“TR* SndLev =” appears in the display. Use the TIME/VALUE dial to adjust the send level.
34.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
35.“TR* SndPan” appears in the display. Use the TIME/VALUE dial to adjust the send pan.
36.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
37.“Master Sel=” appears in the display. Use the TIME/VALUE dial to select the bus (MIX, AUX, FX1, FX2, REC) that you wish to output from the MASTER jacks.
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
38.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
39.“EQ Sel=” appears in the display. Rotate the TIME/VALUE dial.
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
40.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
41.“Direct Out =” appears in the display. Rotate the TIME/VALUE dial. If you do not wish to use Direct OUT, select “Off.” If you wish to output tracks
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
42.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
43.“FX1 MstIns=” appears in the display. Rotate the TIME/VALUE dial. If you wish to insert effect 1 into the master out, select “On.” If not, select “Off.” If effect 1 has been inserted in another channel, the display will indicate
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
44.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
Chapter 5
83
