Chapter 8 Use with a CD-RW Drive
Range
The two tracks designated by the
8.Press [SEL (CH EDIT)] for the track to be written to the
9.The display appears as shown below. Check each of the capacity.
Disk space occupied by a song when written to a disc (27MB)
Writing source tracks (left/right)
00h00m00s00 |
|
|
Blank Space | Performance Data | Blank Space |
Performance Data |
| |
| After Track Cutting |
Before Track Cutting
Time
CONDITION MARKER# | TIME |
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
Internal hard disk free space (468 MB)
• “MEASURE” “BEAT” field: |
Disk space required for the song being written to |
the |
Writing Songs to CD-R Discs
1.Place a blank
2.Press [SONG] several times until “SNG
3.Press [YES].
Drive model number (Hardware Manufacturer)
SCSI ID (in the example, ID=2)
• “SYNC MODE” “SCENE” field: |
Free space on the internal IDE hard disk. |
• “REMAINING TIME” field: |
Free space on the |
* If “the space required for the song being written to the |
internal IDE hard disk” and the “free space on the |
disc,” you cannot write the song to the |
Disk space required for the song being |
written to the |
The disk space occupied by a song when written |
to a |
Chapter 8
CONDITION MARKER#
TIME
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
of the song itself (the space is indicated when |
[SHIFT] + [SONG] are pressed). This is something |
that varies with the number of tracks and record- |
ing mode used. You can make a rough estimate of |
the space required for a song when written to a |
Size (bytes) = 44,100 (Hz) x 2 (stereo tracks) x 2 |
(bytes) x “song length” (in seconds) |
4.“SNG Write+Finalize?” appears in the display.
Press PARAMETER [ ].
“Write w/o Fin.?” (Write without finalize?) appears in the display.
5.Press [YES].
6.Press [SEL (CH EDIT)] for the tracks to be written to the
7.Press CURSOR [ ].
* The used capacity of the song is displayed as 1 MB = |
1,000,000 bytes. The displayed value is the approximate |
standard value. |
10.Press PARAMETER [ ].
“SNG