Chapter 13 Making Global Settings and Checking Conditions
Checking the Size of a Recorded Performance
You can see the Song Name, Song Number, Sample Rate, Recording Mode, and the actual used capacity of the current song by the following operation.
1.Stop the song playback. When the song is per- formed, press [STOP].
2.Press [PLAY (DISPLAY)].
Return to Play condition.
3.Hold down [SHIFT] and press [SONG].
The display will indicate Song Information briefly.
| Song Number | Song Name | ||
CONDITION MARKER# |
| TIME | ||
|
|
|
|
|
dB
0
4
12
24
48
| INPUT TRACK | AUX MASTER |
Sample Rate | Recording Mode | |
Song Capacity (In the example, 72 MB)
*The actual used capacity of the song is displayed as 1 MB = 1,000,000 bytes. The displayed value is the approximate standard value.
System Settings for Each Song
These are overall settings that can saved in any song. These settings are lost if the power is turned off with- out the song being saved, or if the System settings are reset to their original conditions.
Having the Volume Change as Soon
as the Faders are Moved
When you press [FADER (EDIT)] to switch between input and track channels or to recall Scenes, there will be times when fader positions may not correspond to their actual volume settings. In such instances, the position of each fader is represented by a black dot, and the actual level that is set is represented by a white circle. Use the following procedure when you wish to have the volume change as soon as the faders are moved.
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
1.Press [SYSTEM] several times until “SYS System PRM ?” appears in the display.
2.Press [YES].
3.Press PARAMETER [ 
] several times until “SYS FaderMatch” appears in the display.
4.Rotate the TIME/VALUE dial.
Fader Match
Here, the fader is selected to control the sound if there is a discrepancy between the current fader and the actual volume level.
Jump: The actual value will change at the instant that the fader is moved.
Null: No change is made unless the fader or pan knob is moved to its current actual value.
5.Press [PLAY (DISPLAY)]. Return to Play condition.
Holding Level Meter Peaks
You can hold the display of maximum values (peaks) while the level meter appears in the graphic display.
Peak display
CONDITION MARKER# | TIME |
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
1.Press [SYSTEM] several times until “SYS PeakHoldSw=” appears in the display.
2.Press [YES].
3.Press PARAMETER [ 
] several times until “SYS System PRM ?” appears in the display.
4.Rotate the TIME/VALUE dial.
164
