Chapter 5 Storing Mixer Settings
8.“IN* Link=” (“*” is the displayed input) appears in the display. Specify the inputs for which you will turn Channel Link ON. Press the SELECT (CH EDIT) button of the inputs for which you wish to turn Channel Link ON, and rotate the TIME/VALUE dial.
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
9.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
10.“IN* to =” appears in the display. Specify which source is to be recorded on each track. First press the source input SELECT (CH EDIT) button, then press the track STATUS button for the track to which the source is to be recorded.
You can also use the TIME/VALUE dial to select the recording destination track. If you select
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
*Sources that have Channel Link set to “On” cannot be recorded to tracks on which Channel Link is set to “Off” with the EZ Routing.
11.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
12.“IN* Pan =” appears in the display. Adjust the pan of the source. Press the SELECT (CH EDIT) button for the input whose pan you wish to adjust, and use the TIME/VALUE dial. You can also use the pan knobs on the top panel to adjust the pan.
*When Channel Link is on, adjust the Offset Balance of the sources. (p. 151)
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
13.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
14.“IN* Level =” appears in the display. Adjust the level of the source. Press the SELECT (CH EDIT) button for the input whose level you wish to adjust, and use the TIME/VALUE dial. You can also use the channel faders on the top panel to adjust the level.
*When Channel Link is on, adjust the Offset Level of the sources. (p. 150)
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
15.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
16.“Use EFFECT1 ?” appears in the display. If you wish to use effect 1, press [YES], and proceed to step 17. If you do not wish to use effect 1, press [NO] and proceed to step 31.
17.The effect patch will be displayed. Use the TIME/VALUE dial to select the effect patch that you wish to use.
18.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
78
