Roland owner manual Settings for the VS-880EX, 174

Chapter 14 Takein Advantages of the VS-880EX (idea and examples)

Settings for the VS-880EX

1.Press [SYSTEM] several times until “SYS MIDI PRM ?” appears in the display.

2.Press [YES].

3.Press PARAMETER [ ] several times until “SYS MID:MIDIThr=” appears in the display.

4.Rotate the TIME/VALUE dial.

MIDIThr (MIDI Thru Switch)

This switches the function of the MIDI OUT/THRU connector. For now, set this to “Out.”

Out: The connector transmits MIDI message such as metronome Note messages or MTC from the VS-880EX.

Thru: MIDI messages received at the MIDI IN con- nector are retransmitted from the connector without any changes.

5.Press PARAMETER [ ] several times until “SYS MID:SysEx.Rx.=” appears in the display.

6.Rotate the TIME/VALUE dial.

SysEx.Rx. (System Exclusive Receive Switch)

Exclusive messages are received when this is set to “On.” At this time, set this to “On.” The Exclusive messages can be received when the VS-880EX is in Play condition.

7.Press PARAMETER [ ].

“SYS MID:MMC=” appears in the display.

8.Rotate the TIME/VALUE dial.

MMC (MMC Mode)

This setting determines how the VS-880EX imple- ments MMC. Set this to “SLAVE.”

Off: MMC is neither transmitted nor received.

MASTER: MMC is transmitted. The VS-880EX func- tions as the master device for external MIDI equipment.

SLAVE: MMC is received. The VS-880EX functions as a slave device for external MIDI equip- ment.

9.Press PARAMETER [ ] several times until “SYS MID:CtrType=” appears in the display.

10.Rotate the TIME/VALUE dial.

CtrType (Mixer Control Type)

This selects the type of MIDI messages that will be used when transmitting mixer settings to an external MIDI device, or when MIDI messages from an exter- nal MIDI device are used to control the mixer. At this time, set this to “C.C..”

Off: MIDI messages related to mixer operation are not transmitted or received.

C.C.: The mixer is controlled using Control Change messages.

Excl: The mixer is controlled using Exclusive mes- sages.

11.Press [SYSTEM] several times until “SYS Sync/Tempo ?” appears in the display.

12.Press [YES].

“SYS Syn:Source=” appears in the display.

13.Make sure that the Sync Source is set to “INT.”

Sync Source

This determines how the VS-880EX is synchronized with other devices. Here, set this to “INT.”

INT: The VS-880EX runs according to its own inter- nal clock. Select this setting when you are not synchronizing with other devices or when you want external MIDI devices to be controlled by synchronization signals from the VS-880EX.

EXT: The VS-880EX is controlled with synchroniza- tion signals (MTC) from the connected external MIDI device. In this case, the VS-880EX does not operate unless it is receiving MTC signals. Select this setting when you want to use the MTC from an external MIDI device to control the VS-880EX.

14.Press PARAMETER [ ].

“SYS Syn:Gen.=” appears in the display.

15.Rotate the TIME/VALUE dial.

Gen. (Generator)

This selects the type of synchronization signal trans- mitted from the MIDI OUT connector. For now, set this to “MTC.”

Off: Synchronization signals are not transmitted.

MTC: MIDI Time Code is transmitted.

MIDIClk: MIDI Clock according to the Tempo Map is transmitted.

SyncTr: MIDI Clock data recorded on the sync track is transmitted.

174