
Chapter 12 Other Convenient Functions
3.Rotate the TIME/VALUE dial.
Attenuation (In the example, 0 dB)
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
ATT (Attenuation)
Adjusts the volume level
4.Press [PLAY (DISPLAY)]. Return to Play condition.
When Using Balanced Inputs
The
However, some audio devices have the opposite HOT (TIP) and COLD (RING) configuration. Using such equipment as is may result in poor sound placement, disintegration of the
1.Press [CH EDIT (SELECT)] for the channels whose phase you wish to switch.
2.Press PARAMETER [ ] [
] to let “Phase” appears in the display.
3.Rotate the TIME/VALUE dial.
Phase (In the example, Inverted phase)
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
Phase
This selects the phase (NRM, INV) for each channel. Usually, “NRM” is selected.
NRM: Normal phase (same phase as the input)
INV: Inverted phase (opposite phase)
4.Press [PLAY (DISPLAY)]. Return to Play condition.
Determining Output
The
MASTER Jacks
1.Hold down [SHIFT] and press [EDIT (FADER)].
2.Press PARAMETER [ ] [
] to let “Master Sel =” appears in the display.
3.Determine what is to be output from the MASTER jacks by rotate the TIME/VALUE dial.
Master Select (In the example, MIX)
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
Master Sel (Master Select)
This selects what sounds are heard through the MAS- TER jacks.
MIX: The sounds assigned to the MIX bus.
AUX: The sounds assigned to the AUX bus.
FX1: The sounds assigned to the (FX1) EFFECT bus.
FX2: The sounds assigned to the (FX2) EFFECT bus.
REC: All sounds assigned to the RECORDING bus.
4.Press PARAMETER [ ].