Chapter 10 Use with a DAT Recorder (DAT Backup)
11.When the load procedure is finished, “Please Stop DAT” appears in the display. Stop the DAT recorder, then press [YES].
The DAT Name screen appears in the display. If data for two or more songs was saved together, you can rotate the TIME/VALUE dial to view the song names.
| Song Number | Song Name | |
CONDITION MARKER# | TIME | ||
|
|
|
|
dB
0
4
12
24
48
| INPUT TRACK | AUX MASTER |
Sample Rate | Recording Mode | |
Total number of songs backed up to DAT (3 songs)
CONDITION MARKER# |
|
| TIME |
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| dB |
|
|
|
|
|
|
|
| 0 | ||||||
|
|
|
|
|
|
| ||||||||
|
|
|
| 4 | ||||||||||
|
|
| ||||||||||||
| ||||||||||||||
|
|
|
| 12 | ||||||||||
|
|
|
| |||||||||||
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
| 24 | |||||
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
| 48 | |||||
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| INPUT TRACK AUX MASTER | |||||||
12.If you wish to end the operation after merely checking the, press [PLAY (DISPLAY)].
Return to Play condition.
13.If you wish to recover only the data for a specific song, use the TIME/VALUE dial to display the name of the song that you wish to recover.
14.Press [ENTER (YES)].
“STORE Current?” (Store the current song?) appears in the display.
15.If you wish to save the current song, press [YES]; if not, then press [NO]. If you have selected a demo song, then press [NO].
16.“Please Play DAT” appears in the display. Rewind the tape and then put the DAT recorder in play mode.
17.Loading of the song data begins. If you have backed up the data to multiple tapes, then the operation is suspended when the end of each tape is reached. Insert the number tape indicated in the display, press [YES], and start the DAT recorder playing again.
18.When the recover procedure is finished, “Please Stop DAT” appears in the display. Stop the DAT recorder, then press [YES].
19.Press [PLAY (DISPLAY)].
Return to Play condition.
* To cancel this operation, press [CANCEL (NO)].
Checking the Recording
Condition of Saved
Performance Data (Verify)
This operation checks the condition of song data that was recorded to DAT tape. However, it does not per- form a comparison of the song data on the hard disk and the tape.
If results of the DAT verify operation warns that data is not recorded correctly, it is possible that the tape has been scratched or stretched. If the original song data still exists in the disk drive, perform the backup opera- tion once again to a different DAT tape.
*When performing DAT backups, in order to confirm that the data indeed has been properly backed up, we recom- mend that you carry out the Verify procedure as well.
1.Connect the DAT recorder to the
Optical
Digtal Out
DAT Recorder
