Chapter 5 Storing Mixer Settings
45.“FX2 MstIns=” appears in the display. Rotate the TIME/VALUE dial. If you wish to insert effect 2 into the master out, select “On.” If not, select “Off.” If effect 2 has been inserted in another channel, the display will indicate
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
46.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
47.“Change Routing ?” appears in the display. Press [YES]. When the routing has been finalized, “Complete” appears in the display, and you will return to Play condition. If you decide to discard the routing that was set, press [NO].
Storing Mixdown Settings
(Mixdown/Step Edit)
Select this when you want adjust the balance of each track or to record a MD recorder or similar input in
*By Step Editing a mixdown, you can change the track and source settings to be the same. If you wish to change the track settings, press [FADER (EDIT)] to make the FADER indicator light green. If you wish to change the source settings press [FADER (EDIT)] to make the FADER indicator light orange. Here we will explain the example of how to change the track settings.
1.Press [EZ ROUTING] several times until “EZR Mix Down ?” appears in the display.
2.Press [YES].
“EZR Use Template” (do you wish to apply the tem- plate?) appears in the display.
3.Press [NO].
4.“TR* Link=” or “IN* Link=” (“*” is the displayed track/source) appears in the display. Select the tracks/sources for which you wish to turn Channel Link ON. Press the STATUS button for the track/source for which you wish to turn on Channel Link, and use the TIME/VALUE dial.
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
5.Press PARAMETER [ 
]. You can return to the
previous screen by pressing PARAMETER [ 
].
6.“TR* =” or “IN* =” appears in the display. Specify the tracks/sources that you wish to output to the mix bus. Press the SELECT (CH EDIT) button for the corresponding track/source, and use the TIME/VALUE dial. Tracks/sources which are turned “On” will be output.
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
7.“Pan =” appears in the display. Adjust the pan of the track/source. Press the SELECT (CH EDIT) button for the track/source whose pan you wish to adjust, and use the TIME/VALUE dial. You can also adjust the pan using the pan knobs on the top panel.
*When Channel Link is on, adjust the Offset Balance of the sources/tracks. (p. 151)
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
84
