Roland VS-880EX owner manual Inserting a Blank Space Into Performance Data Track Insert

Chapter 6 Editing a Recorded Performance (Track Editing)

Track Exchange with a different V-track bank

You can use Track Exchange to swap tracks or V- tracks of different V-track banks. For example if you wish to copy track 1 / V-track 1 of V-track bank A (hereafter referred to as A-1-1) to track 1 / V-track 1 of V-track bank B (referred to as B-1-1), you can use the following procedure.

1.Track exchange A-1-1 and B-1-8.

2.Copy B-1-8 to B-1-1.

3.Once again, track exchange B-1-8 and A-1-1.

1.You can exchange the tracks that are currently audible. Select the V-track containing the source playback data to be exchanged.

2.Press [TRACK] several times until “TRK Track Exchange ?” appears in the display.

3.Press [YES].

4.Press CURSOR [ ] several times until “TRK Tr.=?-*:?=>?-?:?” (“*” is the current V-track bank) appears in the display.

5.Press [SELECT (CH EDIT)] for the channel con- taining the exchange source track.

The SELECT indicator will light orange.

You can also use the TIME/VALUE dial to select the exchange source track.

6.Press [STATUS] for the exchange destination track.

The STATUS indicator will light red.

7.Rotating the TIME/VALUE dial allows you to specify the exchange destination V-track. For example, “1-A:1” indicates “V-track 1 of track 1 in V-track bank A.”

Exchange	Exchange
source track	destination track

CONDITION MARKER# TIME

dB

0

4

12

24

48

INPUT TRACK AUX MASTER

blinking

8.If you want to exchange multiple tracks simulta- neously, repeat Steps 5–7.

*Do not designate V-tracks that have already been specified as exchange destinations for other Tracks.

9.If there are any tracks which you decide not to exchange, press that track's [SELECT (CH EDIT)] once again.

The SELECT indicator will blink orange.

Alternatively, you can use PARAMETER [ ]

[ ] to access the settings for that track, and press [CANCEL (NO)] twice.

10.Press PARAMETER [ ].

“TRK TrackExchangeOK ?” appears in the display.

11.Press [YES].

This executes Track Exchange. If you wish to cancel, press [NO].

12.When the exchange is completed correctly, “Complete” appears in the display, and return to Play condition.

Inserting a Blank Space Into

Performance Data (Track Insert)

This operation inserts blank space at the specified location.

	blank
To		Time
	Length

*Do not leave sound within 0.5 seconds before or after the area into which the data will be inserted. Any sound which was within 0.5 seconds of the inserted data will not playback.

1.Press [TRACK] several times until “TRK Track Insert ?” appears in the display.

2.Press [YES].

3.Press CURSOR [ ] several times until “TRK Insert Tr.=?-?” appears in the display.

4.Press [STATUS] for the channel containing the insert source track.

The STATUS indicator will light red.

Chapter 6

93