
Chapter 3 Multi-Track Recording
Using Effects | 9. Rotate the TIME/VALUE dial. | ||||||
| CONDITION MARKER# | TIME | |||||
Applying Effects to the Playback | |||||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
When you playback a song, you will frequently want to apply effects such as reverb or delay. Here we will explain how to apply reverb as you playback previ- ously recorded tracks.
INPUT TRACK | AUX MASTER |
dB
0
4
12
24
48
Select an Effect
1.Press [EFFECT] several times until
2.Press [YES].
The number and name of the currently selected effect will be displayed, and you can select the desired effect.
| Effect Number | Effect Name | |||
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
3.Use the TIME/VALUE dial to select the effect you wish to use. Here, select “A00 RV:LargeHall.”
4.After selecting the effect, press [YES].
Specify the Tracks for Playback
5.Press [FADER (EDIT)] several times to let the FADER indicator light green.
6.Hold down [STOP] and press the STATUS button for the track you want played back.
The STATUS indicator lights green.
7.Press [CH EDIT (SELECT)] for the track to which you want to apply reverb.
The CH EDIT indicator lights.
8.Hold down [SHIFT] and press the channel 7
“EFFECT1=” appears in the display.
EFFECT1 (Effect 1 Send Select Switch)
This sets how the signal is sent to the EFFECT 1 bus. Here, select “PstFade”
Off: The signal is not sent.
PreFade: The signal before passing through the channel fader is sent.
PstFade: The signal after passing through the channel fader is sent.
If the effect has been inserted into another channel, the effect cannot be used. But, the signal from the channel will be sent to EFFECT bus.
10.Press PARAMETER [ ]. “EFFECT1 Send=” appears in the display.
11.Rotate the TIME/VALUE dial.
EFFECT1 Send (Effect 1 Send Level)
This adjusts the level
12.Press PARAMETER [ ]. “EFFECT1 Pan=” appears in the display.
13.Rotate the TIME/VALUE dial.
EFFECT1 Pan (Effect 1 Send Pan)
This adjusts the stereo placement of the signal
50