8.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
9. “Level =” appears in the display. Adjust the level
of the track/source. Press the SELECT (CH EDIT)
button for the track/source whose level you wish
to adjust, and use the TIME/VALUE dial. You
can also adjust the level using the channel faders
on the top panel.
* When Channel Link is on, adjust the Offset Level of the
sources/tracks. (p. 150)
10.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
11. “Use EFFECT1 ?” appears in the display. If you
wish to use effect 1, press [YES], and proceed to
step 12. If you do not wish to use effect 1, press
[NO] and proceed to step 24.
12. The effect patch will be displayed. Use the
TIME/VALUE dial to select the effect patch that
you wish to use.
13.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
14. “FX1 Ins=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to insert effect 1,
select either “Ins,” “InsL,” “InsR,” or “InsS,” and
proceed to step 15. If you wish to use effect 1 in a
send/return configuration, select “Off” and pro-
ceed to step 18.
15. “InsSnd =” appears in the display. Use the
TIME/VALUE dial to adjust the insert send level.
16.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
17. “InsRtn =” appears in the display. Use the
TIME/VALUE dial to adjust the insert return
level.
18.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
19. “FX1 Snd=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to send the
track/source to the effect 1 bus, select either “Pre”
or “Pst,” and proceed to step 20. If you do not
wish to send the track/source to the effect 1 bus,
select “Off,” and proceed to step 24.
20.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
21. “SndLev =” appears in the display. Use the
TIME/VALUE dial to adjust the send level. If in
step 14 you selected either “Ins,” “InsL,” “InsR,”
or “InsS,” the sound already processed by the
effect will be sent to the effect bus. (It will not be
re-input to effect 1.)
22.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
23. “SndPan” appears in the display. Use the
TIME/VALUE dial to adjust the send pan.
24.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
25. “Use EFFECT2 ?” appears in the display. If you
wish to use effect 2 press [YES], and make settings
for effect 2 as described in steps 12–23. If you do
not wish to use effect 2, press [NO] and proceed
to step 26.
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Chapter 5 Storing Mixer Settings
85
Chapter 5