INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING LUMINAIRE.
RETAIN FOR FUTURE REFERENCE.
Small falcon
Sheet 3 of 7
1/26/05
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
Voltage Wiring: (Illustration 4)
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
Insulated Voltage
Leads
Wire Nut
White
White
Ground
G | reen |
|
White
Ballast
Black
k
c la B
NOTE: Luminaire shown with lamp and reflector removed.
ILLUSTRATION 4
Some luminaire ballasts are provided with multiple voltage options. The ballast voltage must be properly selected to match the incoming supply voltage. If it is necessary to change the ballast voltage, remove the wire nut from the black supply wire. Remove the ballast voltage lead wire and insulate the bare end according to the local electric code. Select the desired ballast voltage lead wire. Remove the insulation and connect the lead wire to the black supply wire using the wire nut previously removed. Insure that all wire connections are properly secure and insulated according to the local electric code.
CAUTION: The ballast voltage must be properly selected to match the incoming supply voltage or damage to the ballast will occur
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269
